Na wiele pytań można znaleźć odpowiedzi w naszej Bazie Wiedzy. Zapoznaj się z nią, aby uzyskać odpowiedzi przed skontaktowaniem się z nami.
Baza wiedzy
X-Plane.to jest Twoją platformą wyboru, jeśli chodzi o dodatki do X-Plane 12, modów i wątroby. Nie ważne czy płatne czy darmowe: Pokrywamy je wszystkie.
O nas
Od bycia na bieżąco dzieli Cię jedno kliknięcie.
This is a script that allows you to switch the engines made by Carda Jowol for the default A330. They have been made by Carda Jowol originally for the Jar Design A330 and have been modified by Southwest_aviation in order to make it...
This is a script that allows you to switch the engines made by Carda Jowol for the default A330. They have been made by Carda Jowol originally for the Jar Design A330 and have been modified by Southwest_aviation in order to make it fit to the default A330-300 of X-Plane 12.
An installation Manual comes with the zip file.
Get the Carda Jowol engines modified by Southwest_aviation here:
https://forum.thresholdx.net/files/file/2284-default-a330-carda-pwge-engine-mod-configuration-files
1.0.2
15.02 MB
1,686
Updated to version 1.0.2
Initial File Release
Zezwolenie na przesyłanie danych
Pod żadnym pozorem nie wolno Ci przesyłać tego pliku na inne strony.
Pozwolenie na modyfikację
W żadnym wypadku nie wolno Ci modyfikować ani poprawiać mojego pliku.
Zezwolenie na przebudowę
Pod żadnym pozorem nie wolno Ci konwertować tego pliku.
Zezwolenie na użytkowanie aktywów
Pod żadnym pozorem nie wolno Ci wykorzystywać aktywów z mojego pliku.
© Greyfoxx - All rights reserved. Wszelkie dalsze udostępnianie lub redystrybucja tego pliku bez uprzedniej pisemnej zgody autora są zabronione. Ten dodatek do Flight Simulator 2020 został stworzony przez Greyfoxx and shared in Aircraft Liveries » Airbus A330-300 dla X-Plane 12.
Właśnie pojawiło się pierwsze wydanie tego pliku. Witamy na pokładzie!
Masz pytania? Tutaj znajdziesz rozwiązanie.
Dość pusto tutaj.
Dość pusto tutaj.
Użytkownicy ci przekazali darowizny na rzecz Greyfoxx aby nadal tworzył niesamowite dodatki, którymi wszyscy mogą się cieszyć.
These add-ons may be required or recommended to use.
Dość pusto tutaj.
| 
tranadasteve
Thank you for this! Even got it to work on the A330-200. For those of you wondering how, copy the data refs and objets from this .acf file to the -200 .acf file.
iasi3 4 month(s) ago
how did you do that, with excel? because if I copy the carda one the wings are still in the position of the -300 and not the -200. Is there specific steps you could provide please? Thanks in advance
tranadasteve 4 month(s) ago
get the carda download from the threshold link above and copy and paste the GE & PW folders into the objects folder in your a332 folder / copy and paste the sasl folder in this download and put it into the plugin folder in your a332 folder / look at the .acf file from this download and copy the data refs from the GE and PW engines / open up plane maker and press add 10 times in the objects section and put in those data refs you copied from the .acf from this download / add a333/engines/default under the Trent engines / done
Soarandskor 3 month(s) ago
Hi, what coordinates do you use for the engines? I got the switcher working but the engines are stuck at the front of the plane
MikeYVR
can someone explain how to install the switcher on the -200 mod
sofiane330
Honestly, I didn't understand anything about the installation, I tried everything.
Who could help me please?
Greyfoxx 7 month(s) ago
You have to download the Carda engines from the link in the Manual and paste the content into your copy of the default A330 folder. After that, copy everything from the switcher-mod (the plugins folder and the A330.acf into your A330 folder as well. That's it.
PilotB1738
Any way for this to work with x-works 200's also this would be cool for the toliss family and cardas mods.
Greyfoxx 10 month(s) ago
Yes. You can add these engines (both of them) to your A332 in Planemaker with the "Objects" tab, and connect each engine (also in Planemaker in the "Objects"-tab) to the following killdatarefs:
a333/engines/pratt
a333/engines/ge
a333/engines/default
dearste 7 month(s) ago
can u explain better this steps?
thommy24dd
would it be possible to make those script for Rotate MD11GE/PW or and Felis B747 Classic PW/GE ?
Greyfoxx 10 month(s) ago
Possible, yes. But I don't own these planes and I would only buy them to make this mod for them. I am vurrently more focusing on updating the A330neo mod for XP12.
thommy24dd 10 month(s) ago
okay, its understandable. I adapted your switcher for the X-Works A330-200 Mod and it is also working 😊
rafapiloto195 9 month(s) ago
How did you do it?
SpotBot
When I switch engines nothing happens, What do i do?
Greyfoxx 11 month(s) ago
If your menu is greyed out you have to turn off the batteries. The plugin is supposed to make the menu unavailable as long as the batteries are on. This is intended to prevent the engines from being switched while you are operating the aircraft.
wfwool4835 11 month(s) ago
Now works Cheer's.
SpotBot 11 month(s) ago
Is this mod supposed to change the engine model visually?
Greyfoxx 11 month(s) ago
Yes
wfwool4835
How do you install the engines?
Greyfoxx 11 month(s) ago
Download the engines from the Link in the description and put the folders "GE Engines" and "PW Engines" into the objects-folder of your copied A330-300, then put the content from the zipfile of the Engine switcher mod into your A330-300 folder as well. Overwrite when promted.
thommy24dd
Thank you so very much for your nice work!
alberto767
thank you
is nice to have all the engines in one acf file
Now we need all the engine sound
I mean the GE CF6 sound, the RR sound and the PW sound